To Next PageTo Next Page
Need help?Do you have a question about the Ocmis Irrigazione RAIN CONTROL 4 and is the answer not in the manual?
Explains the function of the ON/OFF, START, STOP, and programming keys.
Details the measurements and statuses shown on the RAIN CONTROL 4 monitor.
Guides users on using the PROG, +, and - keys for navigation and setting values.
Selects the desired work programme type (A-E) from the available options.
Configures irrigation based on time, speed, or desired rainfall (mm).
Programs speed or rain priority for multiple distinct zones.
Programs the start time and any delay for the outlet/closing valve.
Enables or disables the machine's start at a specific set time.
Displays hose winding speed, unwound length, and flow rate during operation.
Lists common alarm codes and their meanings for machine malfunctions.
Allows modification of programmed parameters while the machine is running.
Describes manual control of the turbine by-pass for speed checks.
Describes the machine's state and LCD display at the end of a work cycle.
Addresses problems preventing the machine from starting and potential solutions.
Diagnoses issues related to incorrect speed settings or sensor readings.
Resolves errors related to the litre counter or low battery voltage.
Explains the two ways the machine ends irrigation: valve opening or throttle closing.
Provides instructions and precautions for battery installation, charging, and maintenance.
Details the procedure for changing the internal clock battery.
Accesses and modifies core system parameters like units, timing, and structure data.
Configures user-defined settings and structure data for the machine.
Sets the current hours, minutes, day, month, and year for the system.
Introduces the GSM modem and its technical specifications.
Outlines the initial setup process, including SIM card insertion and status checks.
Programs phone numbers for receiving alarm messages via SMS.
Sends SMS commands to request unwound metres, speed, and working time.
Lists and explains error codes related to GSM modem communication faults.
Describes how the RC4 sends alarm messages via the modem and lists potential alarms.
Introduces the Wi-Fi tachometer, its components, and basic operation.
Details errors that occur in communication between the tachometer and the Rain Control 4.
Covers battery life, replacement, and low battery warnings for the Wi-Fi tachometer.
Describes optional accessories and their installation for the Wi-Fi tachometer.
General| Brand | Ocmis Irrigazione |
|---|---|
| Model | RAIN CONTROL 4 |
| Category | Water System |
| Language | English |
