oCOSMO CB301524 - If You Have Analog Audio with Your TV

- 13 -
www.oCOSMO.com
Sound Bar 2.1 User Manual
If you have analog audio with your TV
1. Grab the included 3 head RCA audio cable and use the red and white colored
RCA plug.
2. Find the analog audio out on the back of the TV and connect one end of the cable
to it matching the colors red to red, and white to white.
3. Connect the other end of the cable to the back of the Sound Bar’s AUX red and
white connection.
4. Turn on the TV, and the Sound Bar.
5. Press the AUX button on the Sound Bar’s remote.
6. Enjoy the Sound Bar!