Operating Instructions
1. Insert the power cord into the receptacle.
2. Plug the ozone generator into a grounded 120 Volt outlet.
3. Turn the timer dial to the desired treatment time. Set to “Hold”
and the unit will run continuously. Set for up to 120 minutes and
the unit will shut off automatically after the time has run out.
4. Before re-entering the treated space, be sure ozone is at a safe
level. If excessive amounts of ozone are detected, ventilate the
space before allowing people or pets into the area.
5. If odors or contaminants are still detected, re-treat the area until
it is completely deodorized and sanitized.
Folding Handle
Power Cord
Receptacle/ Fuse
Filter Holder
120 Minute Timer
“HOLD” Function
Indicator Light
FOR USE IN UNOCCUPIED
SPACES ONLY!
To Next Page
Loading...