OdorStop OS900 - Troubleshooting; Specifications; Warranty

Troubleshooting
PROBLEM POSSIBLE CAUSE/SOLUTION
Unit does not
turn on
• Switch not turned on - turn on
• Unit is not plugged in - plug in
Unit turns on
but does not
make ozone
• Dirty plate - clean
• Broken plate - replace
• Blown fuse - replace
Crackling noise • Ozone plate is broken - replace
For problems not listed above, contact our service
department at 1 (888) 956–7468.
Specications
Model OS900 /OS1200
Input Voltage 120V, 60HZ
Power 60W / 100W
Ozone Output 6G/hour / 12G/hour
Ozone Plates 1 Plate
CFM 80 CFM
Warranty
OdorStop warrants to the original purchaser that this ozone
generator is free from any defect in materials and workmanship for
ve(5)yearsfromthedateofpurchase.OdorStopwillreplaceor
repair the unit without charge to the customer.
The warranty does not cover the ozone plate.
To obtain warranty service please return the unit in suitable
packaging to:
OdorStop Customer Service
5139 Southwestern Blvd.
Hamburg,NY14075