5 GALLON
TIRE BEAD SEATER
UNPACKING
After unpacking unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing,
or damaged parts. If any damage is observed, a shipping
damage claim must be filed with carrier. Do not use the
OEMTOOLS
®
5 Gallon Tire Bead Seater if broken, bent,
cracked or damaged parts (including labels) are noted. Any
5 Gallon Tire Bead Seater that appears damaged in any way,
operates abnormally or is missing parts should be removed
from service immediately. If you suspect that the 5 Gallon
Tire Bead Seater was subjected to shock load (a load that
was dropped suddenly, unexpectedly, etc.) immediately
discontinue use until it has been checked by a factory
authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all
safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please
retain instructions for future reference.
The following safety information is provided as a guideline to help you operate your 5 Gallon Tire Bead Seater under the safest possible conditions. Any tool or
piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following safety instructions
are to provide the user with the information necessary for safe use and operation. Please read and retain these instructions for the continued safe use of your
service system. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone who uses the equipment understands
and follows these safety instructions as well.
Operating Instructions and Parts Manual 24449
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
Thank you very much for choosing an OEMTOOLS
®
Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin
using it. This product is designed for certain applications only. OEMTOOLS
®
cannot be responsible for issues arising from modification. We strongly
recommend this product is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to
a particular application, DO NOT use the product until you have first contacted customer service to determine if it can or should be performed on the
product.
WARNING: Pursuant to California Proposition 65, this product contains chemicals known to the state of California to cause cancer and birth defects
or other reproductive harm. Wash hands after handling.
Explanation of Safety Signal Words
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.
NOTES: Provide clarity and helpful information.
WARNING
2/17
2017 OEMTOOLS
®
To Next Page
Need help?
General
