OEM Tools 24529 - User Manual

UNPACKING
After unpacking unit, inspect
carefully for any damage that
may have occurred during transit.
Check for loose, missing, or
damaged parts. If any damage
is observed, a shipping damage
claim must be filed with carrier. Do
not use No Gas Loss A/C Valve
Core Remover/Installer if broken,
bent, cracked or damaged parts
(including labels) are noted. Any
No Gas Loss A/C Valve Core
Remover/Installer that appears
damaged in any way, operates
abnormally or is missing parts
should be removed from service
immediately. If you suspect that
the engine was subjected to
a shock load (a load that was
dropped suddenly, unexpectedly,
etc.) immediately discontinue use
until it has been checked by a
factory authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
The following safety information is provided as guidelines to help you operate your A/C Manifold under the safest
possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe
handling instructions are not known or not followed. The following safety instructions are to provide the user with
the information necessary for safe use and operation. Please read and retain these instructions for the continued
safe use of your service system. Failure to follow instructions listed below may result in serious injury. In addition,
make certain that anyone that uses the equipment understands and follows these safety instructions as well.
Operating Instructions and Parts Manual 24529
03/14
2014 ©OEMTOOLS
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
NO GAS LOSS A/C VALVE
CORE REMOVER/INSTALLER
WARNING

Summary

Unpacking and Initial Inspection

Damage During Transit

Inspect the unit carefully for any damage that may have occurred during transit, check for loose, missing, or damaged parts.

Handling Damaged Units

Do not use if broken, bent, cracked, or damaged parts are noted. Remove from service immediately if it operates abnormally or is missing parts.

Important Safety and Usage Instructions

General Safety and Work Area

Keep bystanders away, stay alert, maintain footing and balance, and ensure a safe, well-lit work area free of obstructions.

Tool Care and Maintenance

Maintain tools with care, keep them dry and clean, check for damage, and use only qualified personnel for service.

Health, Environmental, and PPE

Wear protective gear, avoid breathing refrigerant vapors, prevent fire hazards, and comply with ventilation and disposal regulations.

Operating Procedures

Valve Core Removal

Instructions on how to safely remove the A/C valve core using the tool, ensuring connections are tight and rotating the shaft correctly.

Valve Core Installation

Steps for installing a new valve core, including inserting, tightening, and verifying the seal to prevent refrigerant leaks.

Product Specifications and Maintenance

Component Identification

Details the parts of the No Gas Loss A/C Valve Core Remover/Installer, including adapters and body components.

Maintenance Guidelines

Instructions on proper storage, cleaning, and periodic inspection of hoses to ensure optimal performance and safety.

Limited Warranty Information

Warranty Coverage

Details the one-year limited warranty for defects in material and workmanship, including return procedures for service.

Warranty Exclusions

Outlines conditions not covered by the warranty, such as abnormal use, abuse, accident, or unauthorized repairs.

OEM Tools 24529 Specifications

General

Brand	OEM Tools
Model	24529
Category	Power Tool
Language	English