OEM Tools 24667 User Manual

UNPACKING
After unpacking unit, inspect carefully for any damage
that may have occurred during transit. Check for loose,
missing, or damaged parts. If any damage is observed, a
shipping damage claim must be filed with carrier. DO NOT
use the OEMTOOLS
™
Cordless Screwdriver if broken,
bent, cracked or damaged parts (including labels) are
noted. Any Screwdriver that appears damaged in any
way, operates abnormally or is missing parts should be
removed from service immediately. If you suspect that
the Screwdriver was subjected to shock load (a load that
was dropped suddenly, unexpectedly, etc.), immediately
discontinue use until it has been checked by a factory
authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
The following safety information is provided as a guideline to help you operate your Cordless Screwdriver under the safest possible
conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not
known or not followed. The following safety instructions are to provide the user with the information necessary for safe use and
operation. Please read and retain these instructions for the continued safe use of your service system. Failure to follow instructions
listed below may result in serious injury. In addition, make certain that anyone who uses the equipment understands and follows these
safety instructions as well.
Operating Instructions and Parts Manual 24667
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
Thank you very much for choosing an OEMTOOLS
™
Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with
this product before you begin using it. This product is designed for certain applications only. OEMTOOLS
™
cannot be
responsible for issues arising from modification. We strongly recommend this product is not modified and/or used for any
application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT
use the product until you have first contacted customer service to determine if it can or should be performed on the product.
WARNING: This product can expose you to chemicals, including acrylonitrile, which are known to the State of California
to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Explanation of Safety Signal Words
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTES: Provide clarity and helpful information.
4V MAX* LITHIUM-ION
CORDLESS SCREWDRIVER
1
11/18
2018 OEMTOOLS
™
WARNING
* Voltage is measured without workload. Initial battery voltage
reaches a maximum of 4 Volts. Nominal voltage is 3.6 Volts.

OEM Tools 24667 Specifications

General

Drive Size	1/4 inch
Torque	35 in-lbs
Voltage	4V
Battery Type	Lithium-Ion
Chuck Size	1/4 inch
Max Torque	35 in-lbs

Summary

Operating Instructions and Safety Overview

Unpacking and Initial Inspection

Inspect the unit for any damage that may have occurred during transit and report issues to the carrier.

Explanation of Safety Signal Words

Defines signal words like WARNING, CAUTION, and NOTES to communicate potential hazards and importance.

California Proposition 65 Warning

Warns about potential exposure to chemicals known to cause cancer and reproductive harm.

Important Instructions and Safety Rules

General Safety Rules

Comprehensive safety guidelines covering tool knowledge, work area, personal safety, handling, and maintenance.

Specific Safety Warnings

Key warnings regarding tool modification, disassembly, accessories, and required personal protective equipment.

Product Disposal Guidelines

Instructions for proper disposal of the tool and its battery according to state, federal, and local regulations.

Product Purpose and Features

Defines the intended use of the 4V Cordless Screwdriver for driving screws and its integrated LED light.

Product Specifications and Charging Instructions

Product Specifications

Details key technical specifications of the 4V MAX* Lithium-Ion Cordless Screwdriver.

Charging the Battery

Step-by-step guide on how to charge the tool's internal lithium-ion battery using the provided charger.

Tool Operation and Maintenance

Installing Screwdriver Bits

Instructions on safely selecting and inserting screwdriver bits into the tool's collet.

Right/Left Switch Operation

Explanation of how to use the switch for driving screws (forward) and removing screws (reverse).

Screwdriver Light Function

Details on the integrated LED light that activates automatically when the switch is pressed.

Advanced Operation and Care

Preparing Screw Holes

Guidance on properly preparing screw holes to prevent damage and ensure secure fastening.

Driving Screws

Steps for correctly driving screws, including bit selection, alignment, and manual tightening.

Lithium-Ion Battery Performance

Information on the benefits and performance characteristics of lithium-ion batteries in power tools.

General Maintenance and Cleaning

Instructions for maintaining the tool using identical parts and cleaning plastic components safely.

Battery Care and Electrical Safety

Battery Pack Removal and Recycling

Guidelines for safely removing, handling, and recycling lithium-ion batteries.

Lithium-Ion Battery Maintenance

Recommendations for maintaining battery health, including temperature and charging practices.

Power Source Connection Requirements

Electrical warnings and requirements for connecting the tool to a 120V, 60Hz power source.

Parts Diagram and List

Parts Diagram

An illustration showing the assembly of the Cordless Screwdriver with numbered components.

Parts List

A detailed list of all replaceable parts for the 4V MAX* Lithium-Ion Cordless Screwdriver.

Warranty and Contact Information

OEMTOOLS One Year Warranty

Details the terms and conditions of the one-year limited warranty for OEMTOOLS products.

Contact Us Information

Provides contact details, including address and phone number, for customer service and support.