SECTION I
GENERAL DESCRIPTION
CYCLONE SS
The CYCLONE SS is powered by an electric motor, driving a tandem
hydrostatic pump system, creating a (skid-steer) zero turn radius drivetrain.
Surface coverings and coatings are removed by lowering a weighted blade
onto the surface and moving forward under a high torque drive system. The
surface coating is removed by a flexible sharpened blade conforming to the
floor surface, with the weight of the machine holding the blade firmly to the
floor. The weight does not allow the blade to lift or ride over well adhered
surface coating material, thus lifting off the floor covering material.
To Next Page
Loading...