UNPACKING
After unpacking, inspect
carefully for any damage that
may have occurred during
transit. Check for loose,
missing, or damaged parts.
If any damage is observed, a
shipping damage claim must
be filed with carrier. Do not
use the work light if it appears
damaged in any way, operates
abnormally or is missing parts.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
The following safety information is provided as a guideline to help you operate your Rechargeable Work Light under the
safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling
instructions are not known or not followed. The following safety instructions are to provide the user with the information
necessary for safe use and operation. Please read and retain these instructions for the continued safe use of your tool. Failure
to follow instructions listed below may result in serious injury. In addition, make certain that anyone who uses the equipment
understands and follows these safety instructions as well.
Operating Instructions and Parts Manual 24648
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
RECHARGEABLE MULTI-HEAD
ALL-IN-ONE WORK LIGHT KIT
Thank you very much for choosing an OEMTOOLS™ Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS™ cannot be responsible for issues
arising from modification. We strongly recommend this product is not modified and/or used for any application other than that for
which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first
contacted customer service to determine if it can or should be performed on the product.
Explanation of Safety Signal Words
WARNING
: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result
in property damage.
NOTES: Provide clarity and helpful information.
WARNING
1
5/17
2017 OEMTOOLS
™
180° Pivoting inspection light
Dual function inspection light
features UV LEDs for leak detection
Magnetic
Base
Quick attachment coupler for
easy accessory transition
350 Lumens
flashlight head
180 Lumens 15" flexible shaft extension
for maneuvering in narrow spaces
Rechargeable
18650 battery
USB
charging
cord
AC adapter
Detachable 180° swivel
hook with 2 Powerful
magnets for sticking to
any ferrous surface
Lightweight, anodized
aluminum body
Power button to
adjust light modes
IMPACT
RESISTANT
1m
WATER
RESISTANT
IP54
Flashlight Inspection Flex Light
24
m
23
m
BEAM DISTANCE
150
m
HRS HRS
MAX RUNTIME
HRS
Flashlight Inspection Flex Light
LUMENS
350
MAX OUTPUT
Flashlight
LUMENS
350
Inspection
LUMENS
180
Flex Light
2.5 2.5 2.5
To Next Page
Need help?
General
