Oemtools 26028 User Manual

UNPACKING
After unpacking unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing, or
damaged parts. If any damage is observed, a shipping damage
claim must be filed with carrier. DO NOT use OEMTOOLS™
26028 Slim Folding Rechargeable Work Light if broken, bent,
cracked or damaged parts (including labels) are noted. Any
Work Light that appears damaged in any way, operates
abnormally or is missing parts should be removed from
service immediately. If you suspect that the Work Light was
subjected to a shock load (a load that was dropped suddenly,
unexpectedly, etc.), immediately discontinue use until it has
been checked by a factory authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
The following safety information is provided as a guideline to help you operate your Slim Folding Rechargeable Work Light
under the safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or
safe handling instructions are not known or not followed. The following safety instructions are to provide the user with the
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use of your
Slim Folding Rechargeable Work Light. Failure to follow instructions listed below may result in serious injury. In addition, make
sure that anyone who uses the equipment understands and follows these safety instructions as well.
Operating Instructions and Parts Manual 26028
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
Thank you very much for choosing an OEMTOOLS
™
Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS
™
cannot be responsible for issues
arising from modification. We strongly recommend that this product is not modified and/or used for any application other than that
for which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first
contacted customer service to determine if it can or should be performed on the product.
Explanation of Safety Signal Words
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
NOTES: Provide clarity and helpful information.
SLIM FOLDING
RECHARGEABLE WORK LIGHT
1
10/18
2018 OEMTOOLS
™
WARNING
MAX RUNTIME
High Low
MAX RUN TIME
2h
4h
MAX RUNTIME
High Low
MAX OUTPUT
350
LUMENS
175
LUMENS

Oemtools 26028 Specifications

General

Brand	Oemtools
Model	26028
Category	Work Light
Language	English

Summary

Customer Service

Technical Support Contact

Contact OEM TOOLS for technical questions via phone or email.

Product Handling and Inspection

Unpacking and Damage Check

Inspect unit for transit damage, loose, missing, or damaged parts before use.

Safety Information and Definitions

General Safety Warning

Follow safety information for safe operation to prevent personal injury or damage.

Safety Signal Word Explanation

Defines signal words like WARNING and NOTES for hazard communication.

Important Instructions and Safety Rules

Understand Product Applications and Hazards

Read manual to learn applications, limitations, and potential hazards.

Maintain a Safe Work Environment

Keep work area clean and well lit to prevent accidents.

Child and User Safety

Keep children away and ensure users are trained.

Operational and Charging Safety

Ensure proper switch function and use only provided USB for charging.

Regular Product Inspection and Storage

Check for damage, keep dry, and store tools safely out of reach.

Usage and Environmental Precautions

Do not submerge, use near flammables, or expose to extreme conditions.

Magnetic Interference

Keep work light away from medical and electronic devices due to magnets.

Manufacturer Disclaimer

Manufacturer is not responsible for damage from unskillful handling or rule violation.

Product Purpose and Specifications

Product Purpose

Compact work light with bright COB LED, push button, and magnetic base.

Product Specifications

Details on output, runtime, power source, charge time, voltage, and dimensions.

Features and Contents

Product Features

Highlights include adjustable head, magnetic base, and indicator lights.

Package Contents

Includes work light, manual, USB charging cord, and carabiner.

Operation and Maintenance

Product Operation

Describes the light's design, button, magnetic base, and charging.

Product Maintenance

Guide on storage, cleaning, inspection, and periodic charging.

Disposal and Battery Handling

Product Disposal

Dispose of components according to state, federal, and local regulations.

Battery Disposal

Handle batteries safely, avoid fire, and use designated recycling locations.

Warranty Information

One Year Limited Warranty

Covers defects in material/workmanship for one year from purchase.

Warranty Exclusions

Excludes damage from misuse, abuse, alteration, neglect, or unauthorized repairs.

Liability Limitation

Limits liability for incidental, consequential, or special damages.

Contact Us

Company Contact Information

Provides address, phone number, and website for OEM TOOLS.