Oerlikon CITOARC 1400i - User Manual

EN Safety instruction for use and maintenance - Do not destroy this manual
FR Instruction de securite d’emploi et d’entretien - Conserver ce livret d’instructions
ES Instrucciones de seguridad, empleo y mantenimiento - Conservar el presente manual
DE Betriebs-Wartungs und Sicherheitsanleitung - Das vorliegende Handbuch gut aufbewahren
PT Instrucões de segurança de utilização e de manutenção - Conserve este manual
CS Bezpečnostní pokyny pro používání a údržbu - Návod na používání si uchovejte
EL Οδηγιεσ ασφαλειασ κατα τη χρηση και τη συντηρηση – φυλαξτε το παρον εγχειριδιο
RU Руководство по безопасной эксплуатации и техническому обслуживанию
www.airliquidewelding.com
Air Liquide Welding - 13, rue d’Epluches - BP 70024 Saint-Ouen L’Aumône
Cat. Nr.:
Rev.:
Date:
CITOARC 1400i / 1600i
800035214
03
12. 06. 2009

Summary

Technical Description

Description

The system is a modern direct current generator for welding metals using inverter technology.

Technical Specifications Data Plate

Details regarding duty cycle, overheating, and volt-ampere curves of the welding power source.

Installation

Connecting the Power Source to the Mains Electricity Supply

Instructions for safely connecting the power source to the mains electricity supply.

Handling and Transporting the Power Source

Safety guidelines for handling and transporting the welding power source.

Selecting a Location

Criteria for choosing a suitable location for the welding unit, focusing on safety and ventilation.

Installation Procedures

Connection and Preparation for Stick Welding

Steps for connecting and preparing the equipment for stick welding operations.

Connection and Preparation for Gas Tungsten Arc Welding (TIG)

Steps for connecting and preparing the equipment for TIG welding operations.

Controls: Position and Functions

Front Panel

Details the controls and their functions located on the front panel of the unit.

Maintenance

Oerlikon CITOARC 1400i Specifications