Need help?Do you have a question about the Oerlikon CITOMIG 185MP and is the answer not in the manual?
General safety instructions, compliance standards, and hazard warnings including CE compliance, fumes, and gases.
Warnings for electric shock, powered equipment hazards, and electromagnetic fields (EMF) interference.
Precautions for arc rays, optical radiation, and general welding hazards like sparks and burns.
Guidelines for placing and operating the welding machine in various environmental conditions.
Explanation of duty cycle, thermal protection, and overheating indicators.
Instructions for safely connecting the welding machine to the appropriate power supply.
Detailed description of the machine's controls, indicators, and operational features for user interaction.
Procedure to adjust the sleeve brake torque to prevent spontaneous wire unrolling.
How to adjust the pressure roll force for optimal wire feeding performance.
Step-by-step guide for correctly inserting electrode wire into the welding torch.
Steps for preparing the machine for GMAW and FCAW-SS welding processes.
Setting parameters for GMAW/FCAW-SS welding in manual mode.
Procedure and settings for performing SMAW welding.
Instructions for saving, recalling, and deleting parameter settings on the CITOMIG 210MP.
Information on interpreting and handling error messages displayed on the CITOMIG 210MP.
Daily maintenance tasks to ensure proper operation and longevity of the welding machine.
Periodic maintenance checks and cleaning for the welding machine, recommended every 200 hours.
General| Input Voltage | 230 V |
|---|---|
| Wire Diameter | 0.6 - 1.0 mm |
| Protection Class | IP23 |
| Power Supply | Single-phase |
| Wire Feed Speed Range | 2 - 15 m/min |
| Wire Diameter Range | 0.6 - 1.0 mm |
| Process Types | MIG/MAG, MMA |
| Welding Processes | MIG/MAG, MMA |
To Next Page