Need help?Do you have a question about the Oerlikon CITOMIG 210MP and is the answer not in the manual?
Symbol indicates instructions must be followed to avoid serious personal injury, loss of life, or damage.
Read and understand this manual before operating equipment; arc welding can be hazardous.
Welding equipment generates high voltages; do not touch live parts when equipment is on.
Turn off power before working, ground equipment per local regulations, inspect cables.
Arc rays can burn eyes and skin; use proper shields and protective clothing.
Remove fire hazards; sparks can travel. Do not weld on tanks with vapors.
Use correct gas cylinder, regulators. Keep upright, chained. Avoid damage.
Qualified electrician must connect. Check voltage, phase, frequency, and ground connections.
Knobs for inductance, arc force, wire feed speed, hot start, voltage, and current.
Display shows parameters. User button accesses menus and functions.
General| Input Current | 16A |
|---|---|
| Weight | 13.5 kg |
| Dimensions | 485 x 219 x 370 mm |
| Wire Diameter | 0.6 - 1.0 mm |
| Wire Diameter Range | 0.6 - 1.0 mm |
| Welding Process | MIG/MAG, MMA, TIG |
To Next Page