EasyManua.ls Logo

Oertzen M 320 User Manual

Oertzen M 320
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
To be read carefully before start-up!
Operation Manual
M 320
von Oertzen GmbH Ferdinand-Harten-Str. 10 • 22949 Ammersbek • Tel. +49 40 604110 • Fax +49 40 6041149
www.oertzen-gmbh.de • info@oertzen-gmbh.de
03/08
Question and Answer IconNeed help?

Do you have a question about the Oertzen M 320 and is the answer not in the manual?

Oertzen M 320 Specifications

General IconGeneral
Operating pressure320 bar
Voltage400 V
Frequency50 Hz
Water flow rate12 l/min
Flow Rate12 l/min

Summary

Introduction

Safety Instructions

General Operational Safety Guidelines

Guidelines for adult operation, protective clothing, water jet safety, and electrical precautions.

Pressure, Hose, and Pistol Safety

Adhering to pressure limits, maintaining hose integrity, using approved parts, and safe spray pistol operation.

Environmental and Location Safety

Precautions for fire hazards, electrical safety, extension cables, brake usage, and exhaust gas dangers.

Hot Surface Warning

Warning about the hot exhaust pipe and the need to avoid touching it.

Configuration and Components

Operation and Control

Pre-Start-up Procedures

Essential checks including oil levels, water supply, unit position, and engine warm-up before starting.

Connections and Water Supply

Guidance on connecting water supply, high pressure hoses, and fuel tank.

Starting and Operation

Instructions for starting the engine, adjusting pressure/water, and using the detergent system.

Post-Operation Shutdown

Steps for safely shutting down the machine, including cooling, stopping the motor, and securing the pistol.

Maintenance and Care

Engine, Gear, and Pump Maintenance

Maintenance for engine, reduction gear, and high-pressure pump, including oil changes and checks.

Ancillary System Maintenance

Procedures for water filter maintenance and protecting the machine against frost.

Technical Data

Trouble Shooting

Motor Issues

Troubleshooting steps for issues related to the motor stopping or failing to start.

Pressure and Water Flow Problems

Resolving problems with pump pressure not being achieved or varying during operation.

Vibration Issues

Diagnosing and rectifying excessive vibrations on the high-pressure hose, pistol, or the unit itself.

Detergent Injection Problems

Solutions for problems where the detergent is not being injected into the water stream.

Declaration of Conformity

Related product manuals