Need help?Do you have a question about the OHAUS MB200 and is the answer not in the manual?
Procedure for installing the balance platform and related components.
Guidelines for balance placement, including heat and clearance requirements.
Procedure for comparing an unknown weight against a known reference weight.
Drying a sample for a specific time at a selected temperature.
Drying a sample until a selected rate of drying is reached.
Drying samples with up to three different temperature/time periods.
Instructions for installing the security device on CT Series balances.
Instructions for installing the security device on Port-O-Gram balances.
Instructions for installing the security device on E, Galaxy, GT400, GT4000, GT8000.
Instructions for installing the security device on PRECISION Standard balances.
Instructions for installing the security device on MB200 and PRECISION Plus balances.
Instructions for installing the security device on MB 300, MB301, B Series balances.
Precautions for using the security device with other balance models.
Procedure for installing the balance platform and related components.
Guidelines for balance placement, including heat and clearance requirements.
Procedure for comparing an unknown weight against a known reference weight.
Drying a sample for a specific time at a selected temperature.
Drying a sample until a selected rate of drying is reached.
Drying samples with up to three different temperature/time periods.
Instructions for installing the security device on CT Series balances.
Instructions for installing the security device on Port-O-Gram balances.
Instructions for installing the security device on E, Galaxy, GT400, GT4000, GT8000.
Instructions for installing the security device on PRECISION Standard balances.
Instructions for installing the security device on MB200 and PRECISION Plus balances.
Instructions for installing the security device on MB 300, MB301, B Series balances.
Precautions for using the security device with other balance models.
General| Model | MB200 |
|---|---|
| Capacity | 200 g |
| Readability | 0.01 g / 0.1 % |
| Pan Size | 90 mm |
| Heating Element | Halogen |
| Display | LCD |
| Interface | RS232 |
| Calibration | External calibration |
| Power Supply | AC 100-240V, 50/60Hz |
| Repeatability (Std. Dev.) | 0.01 g |
| Operating Temperature Range | 10 °C – 40 °C |
| Repeatability | 0.01 g (10 g sample) |
| Stabilization Time | 2-3 seconds |
| Temperature Range | 50°C to 200°C |
| Operating Humidity | 10% to 85% RH (non-condensing) |
To Next Page
