OHM CRED Mark 2 2-4 - Information; System Settings Notes

To Next Page

To Previous Page

Information

With the exception of HD and Lunaray Systems all settings are based on a 1:1 ratio and for use with

CFU-A3 amplifiers with gain sensitivity set at 1.1v.

Delays are set for “flush fronts”.

Note: Delays are linked so care should be taken to address the system especially in 3 and

4 way systems IE: Saturn and HD when any adjustments are made.

“LUNARAY 1” is set up for a “soft” mid/high sound,

“LUNARAY 2” is set up for a “linear” sound

HD set up is based on 2 stacks each side.

Any room adjustments should be made on the input EQ only.

NOT whole