Need help?Do you have a question about the OHM CRED Mark 2 2-4 and is the answer not in the manual?
General| Brand | OHM |
|---|---|
| Model | CRED Mark 2 2-4 |
| Category | Music Equipment |
| Language | English |
Warnings about electric shock, hazardous energy, and environmental exposure.
Advice on positioning equipment relative to magnetic fields to prevent interference.
Details on the equipment's compliance with EMC and Low Voltage directives.
Highlights of the unit's design and capabilities, including research and DSP.
Instructions for safely opening the shipping carton and checking for damage.
Essential safety guidelines for operating and maintaining the unit.
Overview of key front panel buttons, displays, and knobs for operation and preset management.
Details on input signal indicators, preset store/recall, channel/edit buttons, text display, and parameter knobs.
Explains output signal/limiter LEDs, mute buttons, and the rear-mounted secure button.
Connection for the main power supply via IEC connector.
Port for fitting an optional network card for system expansion.
Balanced XLR connectors for audio signal input.
Balanced XLR connectors for processed audio signal output.
Serial port for control and firmware updates.
Describes the unit's power-on sequence and initialization process.
How to recall pre-configured settings for various speaker systems.
Using 'Base Presets' for custom crossover settings.
How to navigate menus and adjust adjustable processing parameters.
Step-by-step guide to recalling stored presets using the Recall Button.
Procedure for saving the current settings as a user-defined preset.
Visual representation of the signal processing chain for inputs.
Visual representation of the signal processing chain for outputs.
Explanation of the two operating formats and channel pairing.
Adjustment of input gain level for each channel.
Setting delay times for input signals.
Configuration of high-pass filters for input signals.
Details on shelving and parametric equalisation for input channels.
Adjusting output gain, signal polarity, and delay times.
Configuration of high-pass and low-pass filters for output signals.
Details on shelving and parametric equalisation for output channels.
Explanation of the output limiter threshold and its function.
Setting the audio source for each output channel.
Adjusting screen contrast and EQ bandwidth display units.
Notes on system settings, delays, and EQ adjustments for specific systems.
Overview of inputs, outputs, sample rate, frequency response, THD, and dynamic range.
Technical details on gain, filters, delay, EQ, and limiter parameters.
Specifications for audio/data connectors, mains power, and dimensions.
An empty section for user notes.
To Next Page