EasyManua.ls Logo

Ohmeda light II - Specifications

Default Icon
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
/^\
1.2
SPECIFICATIONS
Size:
Lamp
and
arm
fully
extended
-
34
inches
long
Lamp
housing
and
yoke
12
inches
long
by
6-1/2
inches
wide
by
4-1/2 inches high
Weight:
Rail/Wall
Mount
Model
-
approximately
24
pounds
unpacked
Floor Stand Model - approximately 37 pounds unpacked
Voltage: 115
volts
60 Hz
Current:
8.5
amp
Fuse: 3 amp, 125 volts, 1-1/4" slo-blow
Lamp type: Halogen, 150
watt,
20
Volt,
type Burton
Irradiance: 3 to 76 microwatts/square centimeter/nanometer in the
425-475 nanometer spectrum at bed level, depending on
lamp to patient distance.
Lamp intensity: 6,500 foot candles
Lamp
spot
size:
Variable
from
3 to
20
inches
depending
on
aperture
size selected and light to mattress distance.
Lamp
color
temperature:
3,150
degrees
Kelvin
Average
lamp
life
rating:
1,800
hours
(lamp
life
will
vary
between
1000 and 3000 hours typically)
Leakage
current:
With
the
ground
wire
open
.less
than
100
micro
amperes. * >
With
the
ground
wire
closed
less
than
5
micro
amperes. *
* Measured at any exposed metal surface on
115
volt
units.
page 3

Related product manuals