EN
GRILL 3660
64
☞
The installation must be carried out following the manufacturer
instructions. A wrong installation could cause damages to
people, animals or things, for which the manufacturer cannot
be considered liable.
• To avoid dangerous overheatings, to straighten the whole power cord
and to use the appliance as described in the “FUNCTIONING” paragraph
is recommended.
• Do not leave the appliance unnecessarily inserted. Disconnect the plug
from the mains power supply when the appliance is not used.
• Do not obstruct the ventilation and heat elimination openings or ssures.
• If the power cord of this appliance is damaged, it must be changed
exclusively by a technical assistance centre authorized by the manufacturer,
since special tools are necessary.
The electrical safety of this appliance is guaranteed only when
it is correctly connected to an eective grounding system as
specied by the current norms on electrical safety.
• It’s necessary to check this fundamental safety condition and, in case of
doubts, ask for an accurate check of the system by professionally qualied
personnel.
The manufacturer cannot be considered liable for possible damages
caused by the lack of grounding of the system.
• Before performing any operation turn o the appliance and disconnect
the power plug from the power socket and wait for the appliance to
completely cool down.
GENERAL WARNINGS
To Next Page
Loading...
