68
SMX 9020
EN
USE AS BLENDER
• Make sure that the plug is connected to the outlet and that the starting switch (14)
is on “OFF” position.
• Remove the accessory from the motor pin (if installed).
• Remove the cover (13).
• Place the empty glass (9) on the motor base (1) and rotate it anticlockwise until you
hear the hooking “click”.
• Introduce the foods to be blended in the glass (9).
• Place the cover (11).
The appliance doesn’t start if the glass (9) are not correctly hooked.
The glass blender (9) can placed on the base in three dierent positions,
please make sure the handle is pointed to the right as this is the only
way the blender will work.
• Connect the power plug to the power out-
let making sure that the mains voltage corre-
sponds to the one indicated on the appliance
data plate.
•
Start the appliance by turning the starting switch (14) on the desired switch.
- Speed “4÷5” for “soft or of medium consistency” foods (ex. : cooked vegetable
soups)
- Maximum speed “6” for “hard” foods
(example: carrots, apples, etc.)
- “PULSE” button (P) for pulse function.
Foods blending (potatoes, bread, etc.) must be always performed
adding liquids (water, milk, broth, etc.) ensuring not to ll the glass (9)
beyond the 1500 ml capacity.
If you notice that the motor shows diculties in the rotation, gradually
add small quantities of liquid or increase the speed motor.
220-240V~ 50/60Hz
To Next Page
Loading...
