69
SMX 9020
EN
USE AS BLENDER
• If you want to add eventual ingredients you must remove the cover (11).
• To turn o the appliance move the switch (14) back on “OFF”.
Before removing the cover (11) from the glass (9), or removing
the glass from the motor base (1) always move the switch (14)
back on “OFF” and wait for the blades to stop.
When removing the glass (9) from the motor base (1), the appliance
stops (the safety switch activates).
• To remove food residues from the glass (9) sides or to reprocess the foods themselves
...
.... move the start switch back on “OFF”
.... wait for the blades to stop
.... use appropriate tools ONLY.
☞
DO NOT use ngers.
> > Advices
• The processing degree depends on the functioning time.
• To obtain an optima outcome proceed by cycles and remove, if necessary, food from
the glass sides taking it towards the middle with the help of a spatula.
• To better amalgamate ingredients to Use the “PULSE” function (P) (pulses) button is
advised. The blades will rotate at maximum speed.
Use the “PULSE” function only for short periods (maximum 1 minute)
and/or for operations which need continuous checks during food
processing.
• Add a few ingredients at a time to the glass to ease the correct processing and avoid
that an excessive quantity creates annoying foods leakages through the cover.
NEVER ll the glass (9) over the 1500 ml capacity; the blades action
determines an increase in the processed foods volume.
To Next Page
Loading...
