70
SMX 9020
EN
USE AS BLENDER
• It is recommended to insert liquid foods in the glass before solid ones.
Liquid foods presence ease and speeds up the processing even at a lower speed.
• Work for a few seconds and check the processing consistency; proceed with the pro-
cessing until reaching the desired result.
During functioning hold the glass (9) with your hand.
Do not overload the motor excessively.
If the motor stops, turn o the appliance immediatly, remove the plug
from the outlet, remove part of the processed food and wait a few
seconds before resuming to work.
> > Solid foods processing
• Particularly dense mixes require particular care. During processing, turn o the ap-
pliance (start switch on “OFF”) and after waiting for the blades to stop completely
remove the cover, remove everything that is present on the glass sides and take it
back in contact with the blades using a spatula.
☞
DO NOT use ngers.
• If, in so doing, processing becomes long add, compatibly with the recipe, some liq-
uid and possibly increase speed.
Cut solid foods (carrots, cheese, etc.) into little pieces (into little cubes)
to help their processing.
> > Hot foods processing (maximum temperature
50°C)
• If it’s necessary to insert addition “hot” foods in the glass (9) during processing (max-
imum 50°C), work slowly and with modest quantities at a time.
• If, after a prolonged use, the processing results are not satisfactory anymore, provide
for the blades group (10) change.
Do not try to sharpen the blades (10).
To Next Page
