EasyManua.ls Logo

ohmex TPK 2370 - Installation and Maintenance Safety; Installation and Grounding Requirements

ohmex TPK 2370
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55
EN
TPK 2370
GENERAL WARNINGS
Should you decide to stop using an appliance of this type, remember to
render it unusable by cutting o the power cable after having removed
the plug from the power socket.
Also make sure that all parts of the appliance liable to constitute a danger
are made harmless, particularly for children who could decide to use an
old appliance as a toy.
The installation must be carried out following the manufacturer
instructions. A wrong installation could cause damages to
people, animals or things, for which the manufacturer cannot
be considered liable.
To avoid dangerous overheatings, to straighten the whole power cord
and to use the appliance as described in the “FUNCTIONING” paragraph
is recommended.
Do not leave the appliance unnecessarily inserted. Disconnect the plug
from the mains power supply when the appliance is not used.
Do not obstruct the ventilation and heat elimination openings or ssures.
If the power cord of this appliance is damaged, it must be changed
exclusively by a technical assistance centre authorized by the manufacturer,
since special tools are necessary.
The electrical safety of this appliance is guaranteed only when
it is correctly connected to an eective grounding system as
specied by the current norms on electrical safety.
It’s necessary to check this fundamental safety condition and, in case of
doubts, ask for an accurate check of the system by professionally qualied
personnel.
The manufacturer cannot be considered liable for possible damages
caused by the lack of grounding of the system.