DC motor Control Driver
Model:XH-0SFS-24V-84 433
Input:AC110-265V 50/60HZ
LED OUT:50-200W 220816 C
This manual is designed to make it as easy as possible for you to assemble, install, operate and maintain your
ceiling fan.
Materials
Wiring outlet box and box connectors must be of
type required by the local code. The minimum wire
would be a 3-conductor(2-wire with ground) of the
following size:
Installed Wire Length Wire Size A.W.G
Up to 50 ft 14
50-100 ft 12
NOTE: Place the parts from the loose parts bags in a
small container to keep them from being lost. If any
parts are missing contact your local retailer.
Package Includes
Check to see that you have received the following parts:
1. Mounting Bracket
2. Canopy
3. Canopy Screws
4. 4 & 8 inches Downrod
5. Cross Pin
6. Clamp Pin
7. Ceiling Fan Body
8. Hand-held Remote
9. Wood Screws
10. Expansion Screws
11. Receiver
1
ALL OFF
LIGHT
ON/OFF
F R
3
2 4
FAN/ OFF
Before assembling your ceiling fan, refer
to section on proper method of wiring
your fan (page 10). If you feel you do not
have enough wiring knowledge or
experience, have your fan installed by a
licensed electrician.