EasyManua.ls Logo

Ojocam PRO 2 - Setting Date and Time; Recycle Setting;Loop Recording; Advanced Settings; Video Parameter Settings

Ojocam PRO 2
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
2.3 Setting Date and Time
Turn on the camera using the Power button. Press Menu (long press the Up button) then press
Up and Down buttons to choose Date and Time. Press OK button to confirm.
2.4 Recycle Setting/Loop Recording
Off, 1 minute, 3 minutes, 5 minutes
1. Off Mode
a. The camera cannot start recording automatically when the ignition is on. Also, the
camera will stop recording when microSD card is full.
b. Maximum file size of each recorded video file is 3.66GB. When it reaches the maximum,
the recording is automatically split and saved as another file.
c. If the microSD card is full, the previous files will not be deleted; when card is
full, the display will show "card full" and the camera cannot continue recording.
2. When the “Recycle” Setting mode is "1 min," "3min," or “5min"
a. When car ignition is on, (Note- Some vehicle cigarette lighters have live D.C. Voltage
regardless of whether the ignition key is on or off. In this case the camera is activated
without the use of the vehicle ignition switch. The camera will start recording
automatically.
b. If the microSD card is out of space, the previous saved file will be automatically
overwritten.
3. Advanced Settings:
3.1 Video Parameter Settings
Read this chapter to configure the setup and fine-tune the functions.
Note: Some Parameter Settings may be slightly different for some models.
Turn on the camera using the Power button. Press Menu (long press the Up button), then press
Up and Down buttons to choose icons. Press the OK button to confirm.
1. Video Resolution: 2304*1296@30fps,1920*1080@30fps,1280*720@30fps
2. Video quality: Super fine, normal, fine
3. AE (Automatic Exposure) mode: please leave it at the default value.
4. WDR (Wide Dynamic Range): ON/OFF (turn on to provide clear images even under backlighting.)
5. LDWS (Lane Departure Warning System):ON/OFF (turn on to warn a driver when the car begins
to move out of its line.) Due to the liability issue, we stop supporting the feature.