Disconnect the battery charger from the power supply and allow it to cool before
cleaning, storage and transportation.
Protect the electrical parts against moisture. Do not immerse them in water or
other liquids while cleaning or during use to avoid electric shock. Do not hold
the battery charger under running water.
Check the battery charger regularly for damage. A damaged battery charger
must be repaired before use.Do not use the battery charger, if it has been
exposed to shocks or impacts,if it has been dropped or damaged in any other
way.
Never connect a damaged product to the battery charger. Risk of electric
shock!
Never dismantle the battery charger. Repairs must be performed by an
accredited after-sales service. Incorrect assemblies could cause fire or electric
shock.
Never use the battery charger near explosive or flammable materials. There is a
risk of fire and explosion.
Check the technical data before connecting the battery charger to the power
supply. Only connect the battery charger to a socket which corresponds to the
technical details shown on the rating label. Risk of electric shock!The battery
charger is intended for indoor use only.
Do not misuse the battery charger. The battery charger is only intended to
be used with the battery built inside the product. Other uses could lead to fire
or electric shock.
the battery charger and the charging port are connected correctly and not
obstructed by foreign objects.
·
·
·
·
·
·
·
·
·
11
Keep the charging port clean and dry, and protect it from dirt and humidity.Do
not place any objects on the battery charger and do not cover it, as this could
lead to overheating. Do not place the battery charger close to a heat source.
Always place the power cable in such a way that no one can trip over, step on it
or damage it in any other way. Failure to do so can lead to a risk of material
damage and injuries.
Do not disconnect the battery charger from the power supply by pulling the
power cable. Always pull the plug itself.
Do not charge non-rechargeable batteries.
4.Safety Instructions
·
This section provides information on how to correctly use the product. It is important
to adhere to these instructions for the user's safety and longevity of the product
4-1 Before First Use
1. Wear helmet box protective gear.
2.Scan the QR code with the app and follow the instructions in the app.
·
·
·
·
3.The meter screen lights up, and IOT emits a sound, indicating that the boot
is successful.
12
To Next Page
Loading...
