Okamura Zephyr Light - User Manual

Safety Instructions
(
Make sure to follow these instructions
)
Instructions to Extend the Life of Product
Seat height adjustment
gas spring
Seat height adjustment
gas spring
Base
Main body
Main body
Headrest
Adjustable arm
(
Right
)
Hexagon
socket bolt
(
M6×20L
)
Hexagon socket bolt
(
M6×20L
)
Washer
Assembly Instruction & Instructions for Use
Component List
(
Check the components before starting assembly
)
Assembly Instruction
(
Follow the procedure correctly
)
Indicates that improper handling may cause injury or
property damage.
Caution
Seat height adjustment
gas spring ×1pcs.
Base ×1pcs.
Main body
×1pcs.
Headrest ×1pcs.
Adjustable arm
(
Left and right
)
× 1 piece each
(
Right
) (
Left
)
Hexagon socket bolt
(
M6×20L
)
× 6pcs.
hex key wrench
(
5mm
)
Nominated Tools
Thank you for purchasing Okamura “Zephyr light” product. This guidebook will enable to properly use
the “Zephyr light” product. Thoroughly read this guidebook and fully understand its content before using
the product. Also, we recommend having this handbook nearby whenever using the product.
1 2 3 4
Place the seat hight adjustment
gas spring to the 5-star base.
Place the main body on the seat
height adjustment gas spring.
Attach the headrest to the back of
the main body, and fasten using the
2 hexagon socket bolts (M6×20L).
Fasten the left and right adjustable
arms to the back of the main body
using the 2 hexagon socket bolts
(
M6×20L
)
.
(
Side
)
Gas spring attachment Main body attachment Headrest attachment Adjustable arm attachment
・ Do not handle roughly, or use improperly.
・ Do not use as a carrier.
・ Do not stand on the chair or sit on the front side of seat or armrest.
・ Do not sit on any parts other than the seat.
・ Disassembly/repair.
The seat raising mechanism (gas spring) contains high pressure gas, and in
the event any irregularities are found, any disassembly or repair attempts by
the customer are extremely dangerous for this part in particular, so please
do not attempt disassembly or repair, contact our company's sales agent.
・ Do not disassemble or repair on your own. Please contact our
official dealers when needed.
・ Do not insert hands into any gaps or movable parts.
・ Indoor use only.
・ Do not use outdoors or places with water, as exposure to moisture could
result in problems such as warping or the growth of mold.
・ Avoid keeping the product in direct sunlight as this could result in warping
or fading of colors due to exposure to the sun.
・ Instructions for Use and Maintenance.
If the product has become unsteady due to loosening of the bolts or screws
during use, retighten them immediately. Frequent maintenance of the
product during its use is the key to making it at last a long time.
・ Metal part and resin part care.
For daily care, briskly wipe with a well wrung-out, soft cloth. If there is any
significant dirt, wipe with thinned neutral detergent and carefully wipe down
with water to ensure no detergent remains, then wipe dry with a dry, soft cloth.
・ Mesh material, cushion part care.
After tapping the mesh section with your hand, use an electric vacuum to remove
any remaining dust. The cushion part cannot be cleaned, so if it becomes
significantly dirty, it is recommended to replace it with a new cushion part.

Summary

Assembly Instruction

Gas Spring Attachment

Attach the seat height adjustment gas spring to the 5-star base.

Main Body Attachment

Place the main body on the seat height adjustment gas spring.

Headrest Attachment

Attach the headrest to the main body using hexagon socket bolts.

Adjustable Arm Attachment

Fasten the adjustable arms to the main body using hexagon socket bolts.

Safety Instructions

General Safety Guidelines

Avoid rough handling, misuse as carrier, sitting on edges or movable parts.

Disassembly and Repair

Do not disassemble the gas spring or product; contact authorized dealers.

Product Longevity Instructions

Usage Environment

Use indoors only, avoid moisture, direct sunlight, and outdoor exposure.

Maintenance and Use

Retighten loose bolts/screws and perform regular maintenance.

Material and Mesh Care

Wipe parts with a soft cloth, vacuum mesh, replace dirty cushion parts.

Part Names

Headrest

Adjustable headrest component.

Adjustable Arm

Adjustable armrest component.

Lumbar Support

Lumbar support component.

Seat Slide Lever

Lever for adjusting seat depth.

Reclining Control Lever

Lever for recliner control.

Seat Height Adjustment Lever

Lever for adjusting seat height.

Caster

Wheels for chair mobility.

Operation Functions

Adjustable Arm Height and Angle

Adjust arm height via buttons, and arm pad angles/position.

Seat Depth Adjustment

Adjust seat depth by pulling the seat slide lever and moving seat.

Seat Height Adjustment

Adjust seat height using the lever; seat lowers when weighted.

Reclining Lock and Release

Lock/release recline by pulling/pushing the reclining adjustment lever.

Reclining Tension Adjustment

Adjust recline tension by turning the handle +/-.

Headrest Adjustment

Adjust headrest height and angle via buttons.

Lumbar Support Adjustment

Adjust lumbar support by moving levers behind the back.

Materials

Base; Frame Materials

Die-cast aluminum.

Structural Parts Materials

Polypropylene, Polyamide, Thermoplastic-Elastomer.

Cushion Materials

Molded polyurethane and Polyester.

Okamura Zephyr Light Specifications

General

Category	Indoor Furnishing
Brand	Okamura
Model	Zephyr Light
Adjustable Seat Height	Yes
Backrest Height Adjustment	Yes
Adjustable Lumbar Support	Yes
Tilt Tension Adjustment	Yes
Tilt Lock	Yes
Material	Mesh
Armrest	Yes
Base	5-star base