26
4
5
6
7
Warning!
If the printer has been
printing, the fuser will be
HOT
!
To remove a sheet trapped in the
fuser, grasp the edge of the
sheet, push the fuser pressure
release lever (
1
) towards the
front and down, and lift out the
sheet. Then let go of the fuser
pressure release lever.
If the sheet is well advanced into
the fuser, see step 4 under “Jam
382.”
C
M
Y
K
Clearing Media Jams
Jams 381 (cont.)
To Next Page
Loading...
Need help?
General
