Need help?Do you have a question about the Oki BV1270SIP-OD and is the answer not in the manual?
General| Model | BV1270SIP-OD |
|---|---|
| Category | Gateway |
| Ports | 2 FXS ports |
| Protocols | SIP |
| Operating Temperature | 0°C to 40°C |
| Humidity | 20% to 80% non-condensing |
Critical safety warnings and precautions for operating the equipment.
General guidelines and procedures to follow before using the device.
Details connecting power, ground, interface, RS-232C, and network cables to the unit.
Covers attaching the power cable and connecting the frame grounding cable for proper installation.
Guides on preparing interface cables, connecting them, and installing cable restraints for strain relief.
Explains connecting the unit via RS-232C for initialization and via Network cable for connectivity.
Guides on powering on the unit, checking status indicators, and verifying proper operation.
Describes the procedure for turning off the unit for maintenance or relocation purposes.
Sets up IP address, subnet mask, gateway, and PC connection for configuration.
Details using MCS, creating groups, and configuring gateway settings via the setup wizard.
Explains numbering plans, trunk data, ports, delay timing, and hunt group codes for call routing.
Details creating a DNS.DAT file for number-to-IP translation for unit communication.
Guides on selecting configuration and DNS files for transfer and rebooting the unit.
Covers confirming the file transfer and the final success message upon configuration completion.
To Next Page