Menu functions > 38
SD Card
Setup
This item is displayed only if the SD card (option) is installed.
Initialize Execute Initializes the SD Card to the factory default setting.
Machine performs partition-division, and initializes each
partition.
When this menu is executed, the following confirmation
message appears.
Are You Sure? Yes/No
If No is selected, you will return to the previous menu.
If Yes is selected, the following confirmation message
appears.
Execute Now? Yes/No
If No is selected, you will return to the previous menu.
The request to execute SD Card initialization is put into
the memory and initialization will be executed at the next
power cycle.
If Yes is selected, shutdown takes place, and the SD Card
is initialized at power Off/On cycle.
Resize
Partition
PCL nn%/
Common mm%/
PSll%/<Apply>
Specifies the size of partition. Specifies a size by ratio to
the whole SD Card in % (1% unit).
nn,mm,ll: 1 - 98 and nn+mm+ll=100
The sizes are displayed in the partition list and can be
changed by selecting the partition size to be changed. If
Apply is selected, the following confirmation message
appears.
Are You Sure? Yes/No
If No is selected, you will return to the previous menu.
If Yes is selected, the following confirmation message
appears.
Execute Now? Yes/No
If No is selected, you will return to the previous menu.
The request to execute the partition size change request
is put into the memory and the SD Card initialization and
partition size change will be executed at next power cycle.
If Yes is selected, shutdown takes place. SD Card
initialization and partition size change will be executed at
Power Off/On cycle. (If one partition size is modified, the
others are also modified.) If any partition size is modified,
Initialization of SD Card needs to be executed as well.
If a previously used SD Card is installed, SD Card
initialization also takes place. If an SD Card, which has
been used before, is installed, the layout of this menu
may be different from that of each partition. (The
previously used layout will be displayed.)
Format
Partition
PCL
Common
PS
Formats a specified partition.
When the Enter button is pressed, the following
confirmation message appears.
Are You Sure? Yes/No
If No is selected, you will return to the previous menu.
If Yes is selected, the following confirmation message
appears.
Execute Now? Yes/No
If No is selected, you will return to the previous menu.
The request to execute partition formatting is put into the
memory and formatting will be executed at next power
cycle.
If Yes is selected, shutdown takes place and the partition
is formatted at power Off/On cycle.
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
