Why is my Oki Printer printing blank sheets?
If your Oki Printer is printing blank sheets, reinstall the image drum cartridge. Also, check if the toner cartridge is empty or missing; if so, install a new one.
Why is my Oki B410D printing entire page faintly?
If the entire page prints faintly on your Oki Printer, it could be due to an empty toner cartridge. Install a new toner cartridge. Another possible cause is a dirty LED array, which requires cleaning.
How to fix FEED JAM OR EXIT JAM on Oki Printer?
If your Oki Printer has a FEED JAM OR EXIT JAM, remove the tray and clear any misfed sheets. Then, press the cover release and open the printer’s top cover.
How to clear exit jam on Oki B410D?
To resolve an exit jam in your Oki Printer, try the following steps: 1. Remove the tray and clear any misfed sheets. 2. Press the cover release and open the printer’s top cover. 3. Carefully lift out the image drum, complete with the toner cartridge. Remove any jammed sheets from the paper path. Re-install the image drum complete with toner cartridge, ensuring that the pegs correctly locate into the slots on each side of the printer. 4. Open the rear cover and check for paper in the rear path. Pull out any paper found in this area. 5. Remove the Duplex unit and check for any paper in this area. Remove any paper and replace the duplex unit. 6. Open the Multi Purpose Tray, remove any paper that you find, and then close the tray. 7. Close the top cover and press down to latch it close...
What to do if Oki B410D Printer does not resume printing after removing jammed paper?
If your Oki Printer does not resume printing after removing jammed paper, open and close the top cover.
Why is the print darker than usual on my Oki B410D?
If your Oki Printer is printing darker than usual, the darkness setting may be too high. Change the darkness setting to adjust the print output.
How to fix smeared or blotched print on Oki Printer?
For smeared or blotched print on your Oki Printer, replace the image drum and toner. Contact service.
Why is the print faded on my Oki B410D?
If you are experiencing faded print with your Oki Printer, ensure the toner cartridge is correctly installed. If it is, the toner may be low, so try replacing the toner cartridge.
Why does my Oki B410D Printer freeze when the computer is rebooted?
If your Oki Printer freezes or displays an error message when the computer is rebooted, it may be due to booting the computer while the printer is on, which can cause a communications error. Turn the printer off before rebooting the computer.
How do I fix vertical white streaking on my Oki B410D Printer?
If your Oki Printer is showing vertical white streaking or faint areas on the page, replace the toner cartridge. Also check the drum and replace it if necessary. Clean the LED array.
Labeled diagrams illustrating the printer's external parts and internal components.
Details on the operator panel, LEDs, LCD, and Online button for B410/B410dn models.
Explanation of the menu-driven control panel elements for B420dn/B430dn models.
Overview of accessing and using various printer menus for configuration.
Recommendations for paper, envelopes, transparencies, and labels for optimal print quality.
Step-by-step instructions for installing paper in the main and alternative feed trays.
Guide for installing printer drivers on Windows operating systems.
Instructions for installing printer drivers on Macintosh operating systems.
Configuring printer settings via applications and the Windows Control Panel.
How to set the delay before the printer enters power saving mode.
Procedure for automatic two-sided printing using supported paper sizes.
Steps for performing manual two-sided printing via paper tray or feed trays.
Step-by-step instructions for safely removing and installing a new toner cartridge.
Detailed guide for replacing the image drum unit and its associated procedures.
Instructions for resolving input, feed, and exit paper jams.
Diagnosing and fixing common print quality problems.
Information on available printer upgrades and guidance for their installation.
Details on dimensions, weight, speed, resolution, interfaces, and memory.
Information on paper types, sizes, feed capacity, and tray compatibility.
Information on how to get support via website or phone.
General| Color | No |
|---|---|
| Duplex printing | Yes |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 5.5 s |
| Print speed (black, normal quality, A4/US Letter) | 28 ppm |
| Internal memory | 32 MB |
| Processor model | PowerPC405 |
| Maximum internal memory | 288 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Multi-Purpose tray input capacity | 1 sheets |
| Envelopes sizes | C5, C6, DL |
| Maximum print size | 210 x 297 mm |
| Media weight (tray 1) | 60 - 120gsm |
| Paper tray media types | Envelopes |
| Non-ISO print media sizes | Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm) |
| ISO A-series sizes (A0...A9) | A4, A5 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Power requirements | 230 VAC, 50-60 Hz |
| Compatible operating systems | Windows 2000 / XP / XP x64 / Server 2003 / Server 2003 x64 / Vista (32-bit) / Vista (64-bit) / UNIX / Linux; Mac OS X PowerPC 10.2.8 + / OS X Intel 10.4.4 + |
| Display | LCD |
| Maximum duty cycle | 50000 pages per month |
Weight and Dimensions| Dimensions (WxDxH) | 268 x 369 x 395 mm |
|---|
To Next Page
