To Next Page
K
kellymcdonaldSep 23, 2025
Why does my Oki B4400 Printer have vertical black lines?
- TTimothy KellySep 23, 2025
If your Oki Printer is showing vertical black lines, it indicates a hardware problem. Contact service for assistance.
Why does my Oki B4400 Printer have vertical black lines?
If your Oki Printer is showing vertical black lines, it indicates a hardware problem. Contact service for assistance.
What to do if nothing happens when I try to print on Oki B4400?
If you try to print and nothing happens, but the Oki Printer indicates it is ready to receive data, there may be a configuration error. Check the cable connection to ensure it is secure. If more than one printer is available, make sure your printer has been selected as the active printer.
Why is my Oki B4400 printing blank sheets?
If your Oki Printer is producing blank sheets, it might be due to the image drum cartridge not being properly installed. Try reinstalling it. Alternatively, the toner cartridge might be empty or missing. In that case, install a new toner cartridge.
Why does my Oki B4400 Printer print entire page faintly?
If the entire page prints faintly on your Oki Printer, it could be due to an empty toner cartridge. As toner is used up, pages tend to get fainter, so installing a new toner cartridge may resolve the issue. Another possible cause is a dirty LED array, which would require cleaning.
Why is my Oki B4400 Printer printed page light or blurred?
If your Oki Printer's printed output is light or blurred, there are a few potential reasons. First, check if the toner is low and replace the toner cartridge if needed. Second, ensure that you are using paper specifically designed for laser printers. If neither of these solves the problem, the LED array might be dirty, and cleaning it could improve the print quality.
Why does my Oki B4400 Printer page have repetitive marks?
If your Oki Printer is producing pages with repetitive marks, it's likely due to a damaged image drum cartridge, which causes marks every 1.6 inches (4.06 cm) due to surface nicks and scratches. Try generating a cleaning page, as the repetitive marks may be temporary.
Why does my Oki Printer print all black?
If your Oki Printer is printing a page all black, it indicates a hardware problem. Contact service for assistance.
Why does Oki B4400 Printer need to warm up before printing?
If your Oki Printer is on but must warm up before a job is printed, it's because Power Save mode is enabled to conserve energy. The fuser needs to heat up before you can begin printing the next job. To eliminate this warm-up delay, change the Power Save setting.
What to do if Oki B4400 Printer has smeared or blotched print?
If you're experiencing a smeared or blotched print on your Oki Printer, it could be due to dirty rollers, toner dropped inside the printer, or an image drum problem. Try replacing the image drum and toner.
Why is print darker than usual on my Oki B4400?
If the print on your Oki Printer is darker than usual, the darkness setting might be set too high. Try adjusting the darkness setting to a lower level.
Details the various models, memory, speed, resolution, and emulations available for the printer.
Provides guidance on maximizing printer use through available supporting materials and resources.
Identifies and labels key external components of the printer for user reference.
Illustrates and labels internal components like the LED array, image drum, and fuser unit.
Describes the operator panel for the B4400/B4400n, including LEDs and the Online button.
Explains the primary and secondary functions activated by the printer's Online button.
Introduces the printer's internal settings accessible via software menus for customization.
Describes how to list various items stored within the printer through the Information Menu.
Provides guidelines for selecting appropriate paper and envelopes for optimal printer performance.
Step-by-step instructions on how to correctly load paper into the printer's paper tray.
Details how to configure printer settings using Windows applications and the driver interface.
Guides users through the PCL emulation settings, including paper size, source, and finishing options.
Information on toner cartridge life, replacement procedures, and disposal guidelines.
Details on image drum life, replacement procedures, and handling precautions.
Provides step-by-step guidance on how to safely remove paper jams from the printer.
Offers solutions for common print quality issues like fuzzy print, streaks, or faint pages.
General| Print Technology | LED |
|---|---|
| Type | Monochrome Printer |
| Paper Input Capacity | 250 sheets |
| Duplex Printing | Manual |
| Connectivity | USB 2.0, Parallel |
| First Page Out Time | 5 seconds |
| Media Types | Plain paper, envelopes, labels, card stock |
| Media Sizes | A4, A5, B5, Letter, Legal, Executive |
| Operating Systems Supported | Windows, Mac OS, Linux |
| Power Consumption | 7W |
