B4400/B4600 User’s Guide – Paper recommendations > 42
T
RANSPARENCIES
AND
ADHESIVE
LABELS
The manufacturer of this printer recommends the following
guidelines when selecting transparencies and adhesive labels for
use in your printer:
> Always manually feed single sheets using a Manual Feed
Tray.
> Always use rear output.
> Media must be designed for use in laser printers or
photocopiers and must be able to withstand 200°C for 0.1
sec.
> Do not use media designed for use in colour laser printers
and photocopiers.
> Labels should cover entire carrier sheet.
> Carrier sheet or adhesive must not be exposed to any part
of the printer.
To Next Page
Loading...
