Why are pages curling excessively from my Oki B431dn Printer?
If your Oki Printer is printing pages that curl excessively, turn the paper over in the tray, noting the arrow on the paper package, and install the paper print side down. Also, avoid storing paper in areas of excessive temperature and humidity, and keep it in protective wrapping. The recommended operating humidity is 20-80%.
How to fix input jam in Oki Printer?
If your Oki Printer is experiencing an input jam, begin by removing the paper tray from the printer. Then, remove any crumpled or folded paper. Next, remove any paper from the underside of the printer. Finally, replace the paper tray.
Why does my Oki B431dn print entire page faintly?
If the entire page prints faintly on your Oki Printer, it could be due to an empty toner cartridge. Replace the toner cartridge. Another possible cause is a dirty LED array, which requires cleaning.
Why is my Oki B431dn printing faded?
To resolve faded print on your Oki Printer, first ensure that the toner cartridge is correctly installed. If the issue persists, the toner may be low, and you should replace the toner cartridge.
What to do if my Oki B431dn Printer prints blank sheets?
If your Oki Printer is printing blank sheets, it might be due to the image drum cartridge not being properly installed. Try reinstalling it. Alternatively, the toner cartridge might be empty or missing. In that case, install a new toner cartridge.
How to resolve feed jam or exit jam in Oki Printer?
To address feed or exit jams in your Oki Printer, remove the tray and clear any misfed sheets. Open the printer’s top cover and carefully lift out the image drum with the toner cartridge. Remove any jammed sheets from the paper path. Re-install the image drum and toner cartridge, ensuring correct placement. Lower the top cover without latching it yet. Remove any jammed paper from the stackers and rear path, and check the duplex unit and under the Paper Guard for jams. Open the Multi Purpose Tray and remove any paper. Finally, close the top cover and latch it. The printer will then warm up and resume printing.
Why does my Oki B431dn print vertical white streaks or faint areas?
If your Oki Printer is showing vertical white streaking or faint areas on the page, replace the toner cartridge because the toner is low and not distributing properly. Check the drum and replace it if necessary. If problems persist, contact service. Another possible cause is a dirty LED array, so try cleaning it.
Why does my Oki B431dn print vertical black lines?
If your Oki Printer is printing vertical black lines, this indicates a hardware problem. Contact service for assistance.
What to do if printing does not resume after removing jammed paper from Oki B431dn?
If printing does not resume after removing jammed paper from your Oki Printer, try opening and closing the top cover.
Why does my Oki B431dn produce smeared or blotched print?
If you're experiencing smeared or blotched print with your Oki Printer, replace the image drum and toner, as this could be due to dirty rollers, toner dropped inside the printer, or an image drum problem. For further assistance, contact service.
General| Color | No |
|---|---|
| Duplex printing | Yes |
| Print technology | LED |
| Time to first page (black, normal) | 4.5 s |
| Print speed (black, normal quality, A4/US Letter) | 38 ppm |
| Processor model | 405 |
| Processor family | PowerPC |
| Maximum internal memory | 320 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 54 dB |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 880 sheets |
| Total number of input trays | 1 |
| Maximum number of input trays | 2 |
| Multi-Purpose tray input capacity | 100 sheets |
| Printing colors | Black |
| Maximum duty cycle | 80000 pages per month |
| Recommended duty cycle | 5000 - 5000 pages per month |
| Page description languages | Epson FX, IBM ProPrinter, PCL 5e, PCL 6, PostScript 3 |
| Envelopes sizes | 7 3/4, 9, 10, C5, C6, DL |
| Maximum print size | 216 x 356 mm |
| Paper tray media types | Envelopes, Plain paper |
| Paper tray media weight | 60 - 120 g/m² |
| Non-ISO print media sizes | Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Cabling technology | 10/100Base-T(X) |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Mobile printing technologies | Not supported |
| Supported network protocols (IPv4) | ARP, TCP, UDP, LPR, FTP, Telnet, HTTP, BOOTP, DHCP, AutoIP, DNS, DDNS, uPnP, Bonjour, WINS, SSL/TLS, SMTP, SNTP, WSD-Print, LLTD, SLP, NetBIOS, JetDirect, IPX, R-Printer, N-Printer, NCP, SPX, IPX, SAP, RIP, ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP, PAP, SMB, NetBIOS |
| Networking features | Fast Ethernet |
| Compatible operating systems | Windows 2000\\r Windows XP Home\\r Windows XP Professional\\r Windows Server 2003\\r Windows Server 2008\\r Windows Vista\\r Windows 7\\r Linux\\r Mac OS X 10.3.9+ |
| Compliance industry standards | IEEE 802.3, IEEE 802.3u |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 70 W |
| Power consumption (printing) | 550 W |
| Power consumption (PowerSave) | 8 W |
| Sustainability certificates | ENERGY STAR |
| Storage temperature (T-T) | -10 - 43 °C |
| Operating temperature (T-T) | 10 - 32 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 20 - 80 % |
| Standard interfaces | Parallel, USB 2.0 |
| Display | LCD |
| Product color | White |
Weight and Dimensions| Depth | 364 mm |
|---|---|
| Width | 387 mm |
| Height | 244.5 mm |
Definition of a note providing additional information to supplement the main text.
Definition of a caution for equipment malfunction or damage.
Definition of a warning for personal injury risk.
Lists key features of the printer models B411d, B411dn, B431d, B431dn.
Guidance on getting the most from the printer using supporting materials.
Instructions for viewing the manual online using Adobe Acrobat Reader.
Procedure for printing the manual or selected pages.
Description of the operator panel for B411d/B411dn models.
Explanation of the status indicated by the LED lights.
Function of the Liquid Crystal Display panel.
Primary and secondary functions of the Online button.
How to change the printer's display and report language.
Quick method for listing items stored within the printer.
Adjustment of various print job related functions.
Adjustment for a wide range of print media.
Adjusts general printer settings for user preference.
Controls the printer's PCL emulation settings.
Controls the printer's 10Base-T/100Base-TX network interface.
Provides access to printer maintenance functions.
How to print menu settings using the Online button.
How to print menu settings using the Configuration Tool.
Details of the LCD, scroll buttons, back, OK, and online buttons.
Function of the Cancel button for print jobs and menu exit.
Status of the green Ready indicator.
Status of the red Attention indicator.
Adjustment of various print job related functions for B431 models.
Adjustment for a wide range of print media for B431 models.
Controls network interface for B431dn model.
Access to printer maintenance functions for B431 models.
Guidelines for selecting paper and envelopes for printer use.
Guidelines for using transparencies and labels.
Guidelines for selecting postcards for printer use.
Instructions for loading paper into the paper tray.
How to perform face up and face down printing.
How automatic feed works with different trays.
Instructions for using multi purpose and manual feed trays.
How to change media type using the Configuration tool.
How to select paper feed using the control panel.
How to set the paper size using the control panel.
How to set media type and weight.
Details of the parallel interface connection.
Details of the USB interface connection.
Details of the LAN network interface connection.
Instructions for installing printer drivers on Windows.
Instructions for installing printer drivers on Macintosh.
Overview of printer settings accessible via operator panel and software.
How to set printing preferences within applications.
Settings for paper size, source, and finishing options.
Settings for output resolution, copies, orientation, and watermarks.
Settings for dithering patterns, texture, lightness, and contrast.
Settings for page orientation, duplex printing, and page order.
Settings for paper source and quality options.
Settings for output resolution, copies, and watermarks.
Main tabs for PCL properties including General, Advanced, Device Options.
Spooling options, priority, and availability settings.
Selecting optional upgrades installed on the printer.
Setting paper sizes, fonts, and installed options.
Instructions for automatic two-sided printing.
Instructions for manual duplex printing using the paper tray.
Instructions for manual duplex printing using the manual feed tray.
Explanation of advanced features for custom stationery.
Steps to create PostScript overlays.
Process for creating and downloading overlay projects.
Using defined overlays for document printing.
Steps to create the overlay image file for PCL.
Process for creating and downloading macro projects.
How to test printed macros.
Final step to make new PCL overlays ready for use.
Using defined PCL overlays for document printing.
Indicator and steps for replacing the toner cartridge.
Handling the image drum and installing it with the toner cartridge.
Understanding printer status and error messages on the LCD.
Explains how paper jams occur and how to clear them.
Clearing jams at the feed tray, within the printer, and at the exit.
Troubleshooting faint prints, streaking, and fuzzy print.
Diagnosing smeared, blotched, and darker than usual prints.
Solutions for frequent paper jams and feeding multiple sheets.
Troubleshooting paper not feeding or resuming after jam removal.
Resolving garbled prints, slow printing, and margin issues.
Troubleshooting image prints, configuration errors, and garbage prints.
Addressing printer freezing, odours, and warm-up delay.
General procedure for installing printer options.
Basic characteristics including dimensions, weight, power, and noise level.
Paper and tray compatibility for duplex printing.
Explanations of notes, symbols, and terms used in the tables.
Meanings of paper weight symbols (L, ML, M, MH, H, UH).
Contact information for OKI EUROPE LIMITED.
To Next Page
