Oki B431dn

Operator panels > 19
Parallel menu
This menu controls the operation of the printer’s parallel data interface.
USB menu
This menu controls the operation of the printer’s USB data interface.
Network menu
This menu controls the operation of the printer’s 10Base-T/100Base-TX network interface.
ITEM DEFAULT REMARKS
PARALLEL ENABLE
BI-DIRECTION ENABLE
ECP ENABLE
ACK WIDTH NARROW
ACK/BUSY TIMING ACK IN BUSY
I-PRIME 3 MICRO SEC
ITEM DEFAULT REMARKS
USB ENABLE
SOFT RESET ENABLE
SPEED 480 Mbps
SERIAL NUMBER ENABLE
NOTE
This is applicable only to the B411dn model.
ITEM DEFAULT REMARKS
TCP/IP ENABLE
IP VERSION IPv4
NETBEUI DISABLE
NETBIOS OVER TCP ENABLE
NETWARE ENABLE
ETHERTALK ENABLE
FRAMETYPE AUTO
IP ADDRESS SET AUTO
IP ADDRESS xxx.xxx.xxx.xxx
SUBNET MASK xxx.xxx.xxx.xxx
GATEWAY ADDRESS xxx.xxx.xxx.xxx
WEB ENABLE
TELNET DISABLE
FTP DISABLE
SNMP ENABLE