Oki ES9465 MFP - Paper Misfeed in the Reversing Automatic Document Feeder (Lower)

1 TROUBLESHOOTING FOR THE HARDWARE
16 Clearing a Paper Misfeed
 If paper misfeeds occur frequently
The following are the common causes of paper misfeeds. If the problem persists, check for the following situations.
y An unsuitable original is placed on the Reversing Automatic Document Feeder.
y Unavailable paper with the equipment is used.
y Paper sizes are not consistent between the size in a tray or the MPT and the size registered in the equipment.
y All the misfed paper has not been removed.
y There is too much of a gap between the paper and the side or end guide in the tray.
y The amount of paper placed in a tray exceeds the limit indicated on the side guide of the tray.
 Paper misfeed in the Reversing Automatic Document Feeder (Lower)
1
Open the Reversing Automatic Document Feeder.
2
Lower the green lever, open the reverse cover and
remove the original.
3
Close the Reversing Automatic Document Feeder.
2
1
1