1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 27
1 TROUBLESHOOTING FOR THE HARDWARE
8
Close the Bridge Kit cover.
Paper misfeed in the lower stacker
7
Close the Hole Punch Unit cover.
9
Close the upper stacker of the finisher.
Place your hands on the near and far side of the lever and push to
close the tray until it clicks.
Be careful not to let your fingers be caught between the
finisher body and the stacker (Upper) of the finisher.
This could injure you.
The upper stacker can also be closed by pressing the right side of
the lever.
1
Raise the lever and open the upper stacker of the
finisher.
2
Remove the misfed paper.
2
1
To Next Page
Loading...
