OKRA OKRA
26
27
Press and release either the or button. The control
solution bottle
( ) will appear, then press .
check the expiration date before performing a control
solution test. Do not use if expired. Please write down the
expiration date on the control solution bottle after rst
opening.
Gently shake the control solution before use.
Blood Glucose Test Strips
125
Firmly insert the test strip into the meter test port. Insert
rmly in the direction of the arrow on the test strip (arrow
up). Do not insert the glucose test strip upside down.
Discard the 1
st
drop of control solution, this will eliminate
any residue.
Place a drop of control solution on a clean, dry surface
(e.g. the lid of the test strip vial).
Dip the test strip into the control solution.
Results will appear in 5 seconds. Compare the result to the
range printed on the test strip vial, the result should fall
within that range.
CAUTION
The control solution bottle icon ( ) contains the letter ‘c’ so it will not to be confused with the
medication bottle icon. This will allow you to dierentiate between a control solution test and an
actual blood test.
To Next Page
Loading...