OKRA 06 - OKRA Pro Test Strips; Preparation Before Testing

OKRA OKRA
16
17
OKRA Pro Test Strip
Before Your Test
1. Target to Apply Blood Sample (.5ul)
2. Contact Bar
Insert this End into Test Strip Port
Make sure to read this section and the test strip package insert found in the test strip
box carefully. You will need to have all of the necessary items to begin testing:
Necessary Items
If the meter is moved from one temperature to another, allow 30 minutes for the
meter to adjust to the new temperature before testing.
Make sure that the OKRA Pro meter and test strips have adjusted to the temperature
of the location from where you are testing. Do not operate the OKRA Pro system
under direct sunlight.
WARNING:
To reduce the chance of infection:
1. The lancing device and sterile lancets should NOT be shared with others.
2. Always use a new sterile lancet and a new blood glucose test strip.
3. Lancets and blood glucose test strips are for single use only.


1. OKRA Pro meter
2. OKRA Pro test strip
3. Sterile lancet
4. Lancing device



