OKRA 06 - Storage of Your OKRA Pro System; Meter Storage; Strip Storage

OKRA OKRA
52
53
To avoid the meter and test strips getting dirt, dust or other contaminants, please
wash and dry your hands thoroughly before use.
Meter Storage
- Storage condition:36~86°F or 2~30°C (Temperature).
- Always store or transport the meter in its original storage case.
- Avoid dropping the meter.
- Avoid direct sunlight and humidity.
- Handle the meter carefully to avoid damaging the electronics or causing other
malfunctions.
Strip Storage
- Storage condition:36~86°F or 2~30°C (Temperature)
- Store your test strips in their original vial only.
Do not store in other types of containers.
- Store test strip packages in a cool dry place. Keep away from direct sunlight and heat.
- After removing a test strip from the vial, immediately replace the vial cap and close it
tightly.
- Record the discard date (It expires 6 months after rst opening) on the strip label.
- Do not use if expiry date has passed.
- Touch the test strip with clean and dry hands.
Storage of your OKRA Pro System Control Solution Storage
- Storage condition: Store in a cool dry place between 46~86°F or 8~30°C
(Temperature).
- After use, close cap tightly.
- Record the discard date (It expires 3 months after rst opening) on the control
solution bottle.
- Do not use if expiry date has passed.