Close the door by sliding
it
all the way to the left.
If
the
door is left partially open, the changer will
not
operate
and an error will occur.
When the door is closed, the changer
will
begin
checking for discs
in
the cartridge. This
will
continue
for
up
to
1
1/2
minutes depending on the number of
discs loaded.
To eject the cartridge from the player, simply slide
the
CD changer door
all
the way open. The cartridge will
automatically eject. Remember to keep the door closed
whenever possible to prevent dirt and dust from getting
inside the changer.
AI1
of
the CD functions are controlled
by
the radio
buttons except for ejecting the cartridge. Whenever
a
CD cartridge
with
discs is loaded
in
the changer, “CD”
will appear
in
the radio display.
If
the CD changer is
checking the cartridge for CD’s, TD”
will
flash
in
the
display
until
the changer is ready to play. When a
CD
begins playing, a box will appear around “CD“ along
with
the disc number and track number. The disc
numbers are listed on the front
of
the cartridge.
If
or
“E“
and
a
number appear on the display at
any time, an error has occurred. See “Cassette Tape and
CD Errors” later
in
this section.
TAPE/CD
or
TAPE/AUX:
If
you have
a
cartridge
loaded
in
the changer and the radio is playing, press
TAPE/CD
or
TAPE/AUX to play the CD.
To
return to
the radio while a CD is playing, press
AM/FM.
You can
also
press TAPE/CD or TAPE/AUX to switch between
a
tape and compact disc
if
both are loaded.
PROG:
Press PROG to select the next disc
in
the
cartridge. Each time you press PROG, the disc number
on the radio display
will
increment to the
next
available
CD.
If
one
of
your CD’s cannot be played, its number
will
be skipped when selecting discs with PROG.
3-23
-
To Next Page
Loading...
