Video Screen
The video screen is located in the overhead console.
To use the video screen, do the following:
1. Push forward on the release button and the screen
will fold down.
2. Pull the screen toward you and adjust its position
as desired.
When the video screen is not in use, push it up into its
locked position.
If a DVD is playing and the screen is raised to its locked
position, the screen will shut off, but the DVD will
continue to play through the previously selected audio
source.
Notice:
Directly touching the video screen may
damage it. Do not touch the screen. See
Cleaning
the Video Screen on page 3-100
for more
information.
3-88
To Next Page
Loading...
