Driver
Position
This part describes the driver’s restraint system.
Lap-Shoulder
Belt
The driver has a lap-shoulder belt. Here’s how to wear
it properly.
1,
Close and lock the door.
2.
Adjust the seat (to see how, see “Seats” in the Index)
so
you can sit up straight.
3.
Pick up the latch plate and pull the belt across you.
4.
Push the latch plate into the buckle until it clicks.
Don’t let it get twisted.
Pull up on the latch plate to make sure it is secure. If
the belt isn’t long enough, see “Safety Belt
Extender” at the end of this section.
Make sure the release button
on
the buckle is
positioned
so
you would be able to unbuckle the
safety belt quickly
if
you ever had to.
1-12
To Next Page
Loading...
