2.
3.
4.
5.
6.
7.
8.
9.
Turn the ignition to ACCESSORY or RUN.
Turn the radio off.
Press the
1
and
4
buttons together. Hold them down
until
---
shows on
the
display. Next you will use the
secret code number which you have written down.
Press MN and
000
will appear on the display.
Press MN again to make the last two digits agree
with your code.
Press
HR to
make the first one or two digits agree
with your code.
Press AM-FM after you have confirmed that the
code matches the secret code you have written down.
The display will show REP to let you know that you
need to repeat Steps
5
through
7
to confirm your
secret code.
Press AM-FM and this time the display will show
SEC to let
you
know that your radio is secure.
Unlocking the Theft-Deterrent Feature After
a
Power
Loss
Enter your secret code as follows; pause no more than
15
seconds between steps:
1.
LOC appears when the ignition is on.
2.
Press MN and
000
will appear on the display.
3.
Press MN again to make the last two digits agree
4.
Press HR to make the first one or two digits agree
5.
Press AM-FM after you have confirmed that the
with your code.
with your code.
code matches the secret code you have written down.
The display will show SEC, indicating the radio
is
now operable and secure.
If
you enter the wrong code eight times, INOP will
appear on the display. You will have to wait an hour
with the ignition on before you can try again. When you
try again, you will only have three chances to enter the
correct code before INOP appears.
If you lose or forget your code, contact your retailer.
Disabling the Theft-Deterrent Feature
Enter your secret code as follows; pause no more than
15
seconds between steps:
1.
Turn
the ignition
to
ACCESSORY or RUN.
2.
Turn the radio off.
3.
Press the
1
and
4
buttons together. Hold them down
until
SEC
shows on the display.
3-25
To Next Page
Loading...
