Radiator Pressure Cap
NOTICE:
Your radiator cap is a
15
psi
(105
kPa)
pressure-type cap and must be tightly installed to
prevent coolant loss and possible engine damage
from overheating. Be sure the arrows on the cap
line up with the overflow tube on the radiator
filler neck.
When you replace your radiator pressure cap, an
AC@
cap
is
recommended.
Thermostat
Engine coolant temperature is controlled by a thermostat
in the engine coolant system. The thermostat stops the
flow
of
coolant through the radiator until the coolant
reaches a preset temperature.
When
you
replace your thermostat, an
AC@
thermostat
is recommended.
Power Steering Fluid
3100
(Code
M)
Engine
When to Check Power Steering Fluid
It is not necessary to regularly check power steering
fluid unless you suspect there is a leak in the system or
you hear an unusual noise.
A
fluid loss in this system.
could indicate a problem. Have the system inspected
and repaired.
6-23
To Next Page
Loading...
