8.
Start the engine and let it run until you can feel the
upper radiator hose getting hot. Watch out for the
engine fans.
9.
By this time, the coolant level inside the radiator
filler neck may be lower. If the level is lower, add
more of the proper DEX-COOL@ coolant mixture
through the filler neck until the level reaches the
base of the filler neck.
10.
Then replace the
pressure cap. At
any time during
this procedure
if
coolant begins to
flow
out
of
the
filler neck, reinstall
the pressure cap.
Be sure the arrows
on
the pressure cap
line up like this.
11. Check the coolant in the recovery tank. The level
in
the coolant recovery tank should be at the
HOT
mark when the engine is hot or at the COLD
mark
when the engine is cold.
5-24
To Next Page
Loading...
