If there is a wheel cover,
loosen the plastic nut caps
with the wheel wrench. They
won’t come
off.
Then, using
the flat end
of
the wheel
wrench, pry along the edge
of the wheel cover until it
comes
off.
Be careful; the
edge may be sharp. Don’t
try
to remove the cover with
your bare hands.
If
your vehicle has wheel
nut caps, remove them
using the wheel wrench.
To
remove a center cap, use the wrench to pry gently at
the notch. Don’t use a tool that
is
narrower than the
wrench to pry at this notch.
5-28
To Next Page
Loading...
