5.
Remove any rust
or
dirt
from
the wheel bolts,
mounting surfaces
and spare wheel.
A
CAUTION:
Rust or
dirt
on the wheel, or on the parts to
which
it
is fastened, can make the wheel nuts
become loose after a time. The wheel could come
off
and cause an accident. When you change a
wheel, remove any rust or
dirt
from the places
where the wheel attaches to the vehicle.
In
an
emergency, you can use a cloth
or
a
paper towel
to do this; but be sure
to
use a scraper or wire
brush later,
if
you need to, to get all the rust or
dirt
off.
C
IUTION:
Never use oil or grease on studs or nuts.
If
you
do, the nuts might come loose. Your wheel could
fall
off,
causing
a
serious accident.
To Next Page
Loading...
