AUTOMATIC OVERDRIVE
(@):
This position is for
normal driving. It is the overdrive position. If you need
more power for passing, and you’re:
-
Going less than
35
mph
(56
kmk),
push your
-
Going about
35
mph
(56
km/h)
or more, push the
You’ll shift down to the next gear and have more power.
accelerator pedal about halfway down.
accelerator pedal all the way down.
NOTICE:
If
your vehicle seems to start up rather slowly,
or
if
it
seems not to shift gears as you go faster,
something may be wrong with your transaxle.
Your vehicle may default to SECOND
(2).
However
if
you drive very far that way, your
vehicle can be damaged.
So
if
this happens, have
your vehicle serviced right away. Until then, you
~
can use SECOND
(2)
when you are driving less
i
than
35
mph
(56
km/h)
and AUTOMATIC
~
OVERDRIVE
(@)
for higher speeds.
THIRD
(3):
This position is also used for normal
driving, but it offers more power and lower fuel
economy than AUTOMATIC OVERDRIVE
(a).
Here are some times you might choose THIRD
(3)
instead of AUTOMATIC OVERDRIVE
(a)):
-
When driving on hilly, winding roads.
-
When towing a trailer,
so
there is less shifting
-
When going down a steep hill.
between gears.
2-19
To Next Page
Loading...
