2-34
2. Get up to the speed you want.
3. Press the COAST SET
button on your steering
wheel and release it.
4. Take your foot off the accelerator.
The CRUISE light on the instrument panel cluster will
come on after the cruise control has been set to the
desired speed. It will go off when you:
D
Step lightly on the brake pedal,
D
press CLEAR on the steering wheel or
D
press the CRUISE button on the instrument panel.
Resuming a Set Speed
Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course shuts off
the cruise control. But you don’t need to reset it.
Once you’re going about
25 mph (40 km/h) or more,
press the RES ACCEL
button on your steering
wheel. You’ll go right back
up to your chosen speed and
stay there.
To Next Page
Loading...
